There are many factors that affect the tapping speed of the automatic tapping machine. The specific analysis includes the following: the material and type of the tap, the number of teeth to be eaten, the shape of the lower hole, the cutting material and the cutting oil. Therefore, we must consider these factors when choosing a fully automatic Tapping Machine.
There are many factors that affect the tapping speed of the automatic tapping machine, such as the material used for tapping, the type, the number of teeth eaten, the shape of the lower hole, the cutting material and the cutting oil.
Therefore, we must consider these factors when choosing a fully automatic tapping machine. Extrusion taps are not troubled by chips in the tapping machine. The tapping speed can be faster than cutting. At the same time, the materials to be processed, cutting fluid, machinery and other factors should be taken into account. Generally, they are mostly used in 5-20m/MIN. Similar to the punching process of punching, there are examples of speeds that can reach more than 30m/min under special circumstances. However, because the speed is too high, it will affect the service life of the tap due to the early wear or dissolution relationship, so the speed control of the tapping can not be ignored. It is more difficult to tap the tapping thread of the sleeve tapping machine. First, you need to define what is a deep hole. Why does it require special consideration? In drilling, those holes with a hole depth greater than 3 times the hole diameter are called deep holes. Deep hole tapping means that the tapping depth is more than 1.5 times the diameter of the tap. This is often referred to as deep hole tapping when machining a 3/8 inch thread with a 1/4 inch diameter tap.