Is the use of a machine tap internal thread Tapping Machine, it is a kind of internal thread processing machine widely used. Tapping machine automation highest work, as long as the blank into the hopper can be automatic feeding, automatic positioning, automatic clamping, automatic tapping, automatic unloading, a worker can operate multiple devices at the same time, high production efficiency, significant savings in labor costs. We in automatic lathes in the process will often encounter some problems, which arise due to tapping tapping machine, tapping machine is usually encountered the tapping unstable seven reasons to talk about solutions:

The first reason: stop tapping machine tapping tip wear or spring flabby. Should check block tapping tapping machine shoot didn’t wear lead to uneven force, then check the spring are not adjustable too loose or change the new spring.

Second reasons: tapping tapping machine belt adjustment or belt slipping due to the damage is not tight enough. The triangle belt too loose tapping tapping machine can adjust the machine behind the adjusting screw to adjust to the appropriate state or a new belt;

Third: tapping tapping machine belt too loose can be fixed tapping machine, tapping machine, four small screws loosen the tapping machine, tapping machine is pressed downwards, and then tighten the four screws.

Fourth reasons: clutch brake power with bad brakes can change or replace the tapping machine tapping machine;

Fifth reasons: the micro switch is broken, the replacement of the new micro switch. (how to change the micro switch to be continued);

Sixth reasons: cam stop switch position is wrong. If the start is too slow will lead to the instability of tapping tapping machine;

Seven reasons: material deformation or excessive residue in the chuck. Should check the materials and cleaning chuck.